您现在所在的位置:首页 >>技术文章
  • 台湾华仪7130、7132耐压测试仪
  • 点击次数:379 发布时间:【2016-12-09】
  • 台湾华仪7130、7132耐压测试仪的详细介绍

    台湾华仪71307132耐压测试仪

    简单介绍

    交流耐压测试仪,05.00KV020.00mA,电弧侦测、键盘锁定、安全锁定功能

     

    产品特点

    • 三种测试功能可供选择:ACW, DCW, IR
    • 大型128×64 Graphic LCD 显示器
    • 单机可与7315接地阻抗测试器连结符合标准19英吋仪器架
    • 可同时进行100台的联机测试
    • 内建10组程序记忆、每一组3个测试步骤可进行程序记忆步骤的连结测试
    • 快速放电功能,可于0.2秒将被测物上的电能放完,确保人员安全
    • 防高压触电功能,当人体误触时可立即中断输出
    • 开机自我检测功能的测试,可于测试前进行判定各项测试功能是否正常
    • 前面板软件输入校正
    • 时间与日期的设定,可设定校正时间及预警时间提醒使用者
    • 内建PLC Remote遥控界面
    • 键盘锁定功能
    • 安全锁定功能
    • 体积小、重量轻

    技术参数

    SPECIFICATIONS

    MODEL

    7130

    7132

    7140

    7142

    AC WITHSTAND VOLTAGE

    Output Rating

    5KVAC/20mA

    Range

    Resolution

    Accuracy

    Output Voltage, KVAC

    0-5.00

    0.01

    ±(2% of setting + 5V)

    Output Frequency

    50Hz/60Hz ±100ppm, User Selection

    Output Waveform

    Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5

    Output Regulation

    ± (1% of output + 5V), From no load to full load

    SETTINGS

    Max-Limit AC Current, mA

    0 - 20.00

    0.01

    ±(2% of setting + 2counts)

    Min-Limit AC Current, mA

    0 - 9.999

    0.001

    ±(2% of setting + 2counts)

    Ramp Up Time, second

    0.1 - 999.9

    0.1

    ±(0.1% + 0.05sec)

    Ramp Down Time, second

    0 - 999.9

    0.1

    Dwell Time, second

    0, 0.3 - 999.9
    (0=continuous)

    0.1

    Arc Detection

    0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)

    DC WITHSTAND VOLTAGE (7140,7142 ONLY)

    Output Rating

    6KVDC/7500μA

    Output Voltage, KVDC

    0 - 6.00

    0.01

    ±(2% of setting + 5V)

    Output Ripple

    <5%(6KV/7500μA at Resistive Load)

    SETTINGS

    Max-Limit DC Current, μA

    0 - 7500

    1

    ±(2% of setting + 2counts)

    Min-Limit DC Current, μA

    0 - 999.9

    0.1

    ±(2% of setting + 2counts)

    Ramp Up Time, second

    0.1 - 999.9

    0.1

    ±(0.1% + 0.05sec)

    Ramp Down Time, second

    0, 1.0 - 999.9

    0.1

    Dwell Time, second

    0, 0.4 - 999.9
    (0=continuous)

    0.1

    Arc Detection

    0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)

    Discharge Time

    < 200 msec

    INSULATION RESISTANCE (7132,7142 ONLY)

    Output Rating

    1KVDC/9999MΩ

    Output Voltage, DCV

    30 - 1000

    10

    ±(2% of setting + 5V)

    SETTINGS

    Max-Limit Resistance, MΩ

    0, 1 - 9999 (0=OFF)

    1

    ±(2% of setting+2counts)at 500-1000VDC,
    1 -1000 MΩ

    Min-Limit Resistance, MΩ

    1 - 9999

    1

    ±(5% of setting+2counts)at 500-1000VDC,
    1000 -9999 MΩ

    ±(8% of setting+2counts)at 30-500VDC,
    1 -1000 MΩ

    Ramp Up Time, second

    0.1 - 999.9

    0.1

    ±(0.1% + 0.05sec)

    Ramp Down Time, second

    0, 1.0 - 999.9

    0.1

    Delay Time, second

    0, 0.5 - 999.9
    (0=continuous)

    0.1

    MEASUREMENT

    AC/DC Voltage, KV

    0 - 6.00

    0.01

    ±(1.5% of reading + 1count)

    DC Voltage, V (IR only)

    30 - 1000

    1

    ±(1.5% of reading + 5V)

    AC Current, mA

    0 - 3.500

    0.001

    ±(2% of reading + 2counts)

    3.00 - 20.00

    0.01

    DC Current, μA

    0 - 350.0

    0.1

    ±(2% of reading + 2counts)

    DC Current, mA

    0.300 - 3.500

    0.001

    3.00 - 7.50

    0.01

    Resistance, , MΩ

    1 - 9999
    (AutoRange)

    0.001
    0.01
    0.1
    1

    ±(2% of setting+2counts)at 500-1000VDC,
    1 -1000 MΩ
    ±(5% of setting+2counts)at 500-1000VDC,
    1000 -9999 MΩ
    ±(8% of setting+2counts)at 30-500VDC,
    1 -1000 MΩ

    GENERAL

    Input Voltage AC

    115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.1

    PLC Remote Control

    Input : Test , Reset , Memory1.2.3 , Interlock

    Output : Pass , Fail , Processing , Reset-Out

    Interface(Option)

    RS485 Interface

    Memory

    10 memories, 3 steps/memory

    Graphic Display

    128×64 Graphic LCD

    Safety

    Built-in Smart GFI circuit,GFI trip current 450?A max, HV shut down speed: <1mS

    Key Lock

    To prevent unauthorized alteration of the test Parameters

    Calibration

    Build-in software and external calibrated meters

    Verification

    Build-in software driven verification menu to test fault detection circuits

    Alarm Volume Setting

    Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume.

    Environment

    0-40, 20-80%RH

    Dimension/Net Weight

    215mm(W)×89mm(H)×370mm(D)/ 10Kg

    STANDARD ACCESSORIES

    Power Cord(10A)

    ×1

    Fuses

    ×2 (Including a spare contained in the fuse holder)

    Interlock Disable Key(1505)

    ×1

    Hipot Test Lead ,1.5m(1101)

    ×1

    Hipot Return Lead ,1.8m(1102)

    ×1

    *product specifications are subject to change without notice.

上海徐吉电气有限公司(www.shst004.com)热销产品:耐压仪,耐压测试仪,交流耐压仪,高压耐压仪,超高压耐压仪,绝缘耐压试验仪

手机:
13818304482
13917842543
点击这里给我发消息
点击这里给我发消息
点击这里给我发消息

化工仪器网

推荐收藏该企业网站